For anyone who purchased a printed pattern or pdf from another source, please make a note of the corrections below before cutting into your precious fabric.
These corrections are for patterns purchased prior to October 5, 2025. If you encounter a pattern (paper or pdf) with any of these listed errors, please email to let me know.
Page 3, Step 1. Make Half Square Triangles (HSTs) The diagram is mis-labled and should show a 3-1/4” Fabric C square (not a Fabric B square). The instructions should read: “Draw a diagonal line on wrong side of one 3-1/4” Fabric C square…the rest is correct. Cutting instructions are correct, thank goodness! :)
Page 4, Step 4. Make Eye Unit Diagram is correct. Instructions should refer to one 1” x 1-1/2” Fabric C strip (not Fabric A).
Step 7. Assemble Block Step 5 in the list should read Body Unit 2 (not 21).
Page 6, Step 6. Make Bottom Fin The diagram for construction of Bottom Fin B is incorrect. This is the correct orientation of the fabric strips:
Page 8, Step 7. Assemble Block Diagram is missing step 3. After sewing Eye Unit to HST Units, this completed block is then sewn to the Body Unit as Step 3.
Page 9, Section: "Make School of Fish #3" Step 1. Make Fish Body Diagram is correct. Instructions should read: Draw line on wrong side of four 1-1/2" Fabric D squares (not 2" Fabric D squares)
Step 2. Tail Fin Unit Diagram is correct. Instructions should read: using two 2-1/4" Fabric B (not Fabric D) squares.
Page 10, Step 3. “Assemble School of Fish Block #3” Diagram is correct. Instructions starting with #5 should read:
5- Sew one 4-1/2” x 4-1/2” Fabric D square to left side
6- Sew one 4-1/2" x 4" Fabric D rectangle to right side.
Make Single Fish
Step 1. Diagram for make flying geese. Fabric rectangle 2-1/2”x 4-1/2” should be Fabric B (not C).
Step 3. Add sashing to single fish blocks: says to follow diagram above. Should be below not above.
Page 11: Typo under “Make Center Seaweed”: text in first paragraph should refer to the same method as Tall Seaweed Blocks, not Tall Sea grass blocks.
Under cutting instructions for Flower Block A: From Green 2 cut 6 - 3-1/4” squares
Under Cutting instructions for the Bird Block, measurement for Fabric D is 1-1/2” x 3”
Cutting instructions for Flower A are correct.
On page 2., Step 2: The diagram/instructions should indicate the HST being paired/sewn to a second 3-3/4” Fabric A square (not a 3-1/2” square). Written instructions should also be corrected to reflect this change.
Step 3. Diagram should show HST being paired/sewn with a 3-3/4” Fabric C square (not 31/2”). Written instructions should also be corrected to reflect this change.
Make Bird Block, Page 6
Step 1. Make Head block. The unfinished size of the head block for both the right and left bird should be 3-1/4” x 8-1/4” (not 6-3/4”)
For materials, you will only need 3 3/4 yards of background fabric, not 4 2/3 yard.
One of the diagram images in the assembly picture for Block B is incorrect. Sewing direction lines should go in the direction shown on the bottom left of diagram below.
The number of blocks noted for quilt layout Option A are correct, however, if you are making quilt layout Option B, you will need to make 24 Block A blocks and 18 Block B blocks.
Page 1
In the cutting instructions for Flower Stems Print 1, the second cut should be (1) - 1-1/2" x 15-1/2" strip (not 15"). This will then agree with the diagram shown on page 5 for Leaf/Stem Block D.
The cutting instructions omitted (2) 2-1/2" x 8" pieces of background fabric needed to complete Leaf/Stem Block C as shown on page 5.
Page 4
In the Construction Step 3 - Make Leaves section, Step 2, the diagram is correct, but the directions should say to use one 2” background fabric D square (not 2-1/2”). Also where it says to use a 3-1/2" x 4" background fabric D square; this should be a 3-1/2" square which will then agree with the cutting instructions for leaf style 2, background fabric D.
For background fabric, you will need 2 yards (not 1 3/4 yards)
Typo on page 3, under step Step 3b. The yellow Fabric B squares should be noted as 2 1/2” (not 2”). Cutting instructions are correct, I just botched it in the diagram.
Page 1
Under “Fabric Cutting” instructions, for Fabric C you will need to cut 6 - 3 1/2” squares from the 6 Fabric C fat quarters, not 4. This will give you a total of 36 - 3 1/2” squares to complete the 4 corners of each block.
Under “Cutting” instructions, the second strip dimension for the ROAD is incorrect. It should be, 2 1/2” x 25”, not 2 1/2 x 28”.
Image below shows assembly of bottom row of quilt, and arrow points to adjusted strip dimension/placement.
On page 2 there are two typos:
In step F, finished Unit G should measure 7 1/4” x 2” unfinished.
In step G, Unit H should measure 8 3/4” x 2” unfinished
Under Construction Step 1, Print fabric B it should indicate 8- 1 3/4" x 3" rectangles instead of the 4 noted.
