All colors of our unisex premium crewneck and hoodie style sweatshirts are made with 100% ring-spun cotton face material and soft fleece lining. The fit is flattering, comfy and won’t shrink or pill after washing. Cotton Heritage is our selected sweatshirt brand because of their commitment to sustainable practices and strict humanitarian workplace standards. Like our tshirt partner, Cotton Heritage is also Platinum WRAP certified. We are happy to support companies that take care of their people.

 

Sweatshirt Sizing Guide

Pro tip for sweatshirt fit (both styles): Measure a sweatshirt you have that fits well and compare to size chart below. The measurements shown in the charts are provided by our supplier. Product measurements may vary by up to 2” (5 cm). If your measurements fall within the outer 2” of the size chart, or if you prefer a roomier fit, you may wish to size up.

Crewneck Sweatshirts

All colors of our unisex premium crewneck sweatshirts are made with 100% ring-spun cotton face material and soft fleece lining. Lining material is 65% ring-spun cotton, 35% polyester on colors other than Charcoal Heather and Athletic Grey. Charcoal Heather fleece lining is 60% ring-spun cotton, 40% polyester, Athletic Grey fleece lining is 55% ring-spun cotton, 45% polyester

  • Fabric weight: 8.5 oz./yd.² (288.2 g/m²)

  • Tightly knit 3-end fleece

  • Side-seamed construction, self-fabric patch on the back

  • Double-needle stitched rib collar, cuffs, and hem

  • Tear-away label

A. Length

Place the end of a measuring tape beside the collar at the top of the garment (high point shoulder). Pull the tape to the bottom of the item.

B. Width

Place the end of the tape at the seam under the sleeve and pull the tape measure across the product to the seam under the opposite sleeve.

C. Sleeve Length

Place the end of a measuring tape at the center back of the collar, then pull the tape along the top seam of the sleeve. When you get to the shoulder hold the tape in place at the shoulder and continue to pull down the sleeve until you reach the hem of the sleeve.

Hoodie Sweatshirt

All colors of our unisex premium crewneck sweatshirts are made with 100% ring-spun cotton face material and soft fleece lining. Lining material is 65% ring-spun cotton, 35% polyester on colors other than Charcoal Heather and Athletic Grey. Charcoal Heather fleece lining is 60% ring-spun cotton, 40% polyester, Athletic Grey fleece lining is 55% ring-spun cotton, 45% polyester

  • Fabric weight: 8.5 oz./yd.² (288.2 g/m²)

  • Tightly knit 3-end fleece

  • Side-seamed construction, self-fabric patch on the back

  • Double-needle stitched rib collar, cuffs, and hem

  • Tear-away label

A. Length

Place the end of a measuring tape beside the collar at the top of the garment (high point shoulder). Pull the tape to the bottom of the item.

B. Width

Place the end of the tape at the seam under the sleeve and pull the tape measure across the product to the seam under the opposite sleeve.

Frequently Asked Questions

  • We have gotten feedback from some customers that these sweatshirts can run a little small. Our best advice is to measure a sweatshirt you have that fits well and then compare to the sizing charts. If your measurements fall within the outer 2” of the size range, we recommend sizing up.

  • Yes, this is completely normal. The DTG digital printing process requires a fabric finish to ensure the water-based inks adhere to the fabric surface (otherwise they would flake off). We recommend washing before wearing following instructions above. It should only take one wash cycle to eliminate the odor.

  • Our printer uses the latest direct-to-garment (DTG) printing technology with high-quality inks that won't fade for a long time if taken care of properly. We recommend the following care steps to best extend the life of your sweatshirt:

    • Machine-wash cold, inside-out on a gentle cycle with mild detergent and like colors. Use non-chlorine bleach only when necessary. Do not use fabric softeners or dry-clean the items.
    • Tumble-dry on a low cycle, but hang-drying works best.
    • Iron inside-out using a cool iron. Do not iron the print.

    Follow these instructions carefully to avoid fading and cracking of the print, and shrinking the garment that can occur if you wash or dry it on a high setting.

  • We want you to be happy with your purchase. Each item is made to order and ships to you directly from the manufacturer. If your item arrives and is damaged, defective, misprinted, or differs from your order, please contact immediately so we can help get you a replacement. Unfortunately, because each item is made especially for you, we are unable to offer exchanges or returns for any other reasons.

  • Don’t worry, we’re here to help! Please send a few photos to info@katespain.com showing the problem as clearly as possible. Use a measuring tape in the photo if that will help to convey the issue (ie: if the print is off-center). Include a brief description in your note and either Pete or I will get back to you quickly to resolve the issue to your satisfaction as much as possible. Your happiness and positive experience is so important to us!

  • On average, it takes 7-10 business days for the t-shirts to arrive. You will receive an email with tracking information once your shirt ships. If you ordered multiple items, they may ship in separate packages.