Holiday Crewneck Sweatshirt
Holiday Crewneck Sweatshirt
This unisex premium sweatshirt has a classic crew neck, flattering unisex fit. All of our unisex premium crewneck and hoodie style sweatshirts are made with 100% ring-spun cotton face material. It won’t pill even after multiple washes. In fact, it only gets softer!
Be sure to triple check the sizing guide and FAQ before ordering.
Click here for Sweatshirt Sizing Guide
100% cotton face
65% cotton, 35% polyester
Santa’s Coal is 55% cotton, 45% polyester
Fabric weight: 8.5 oz/y² (288.2 g/m²)
Tightly knit 3-end fleece
Side-seamed construction
Self-fabric patch on the back
Double-needle stitched rib collar, cuffs, and hem
Tear-away label
Age restrictions: For adults
EU Warranty: 2 years
Other compliance information: Meets the flammability, lead, cadmium, bisphenols and phthalates level requirements.
In compliance with the General Product Safety Regulation (GPSR), Oak inc. and SINDEN VENTURES LIMITED ensure that all consumer products offered are safe and meet EU standards. For any product safety related inquiries or concerns, please contact our EU representative at gpsr@sindenventures.com. You can also write to us at Markou Evgenikou 11, Mesa Geitonia, 4002, Limassol, Cyprus.
Sweatshirt Sizing Guide
Measurements are provided by suppliers. Product measurements may vary by up to 2" (5 cm).
A. Length
Place the end of a measuring tape beside the collar at the top of the garment (high point shoulder). Pull the tape to the bottom of the item.
B. Width
Place the end of the tape at the seam under the sleeve and pull the tape measure across the product to the seam under the opposite sleeve.
C. Sleeve Length
Place one end of the tape at the top of the set-in sleeve, then pull the tape down until you reach the hem of the sleeve.
-
Our printer uses the latest direct-to-garment (DTG) printing technology with high-quality inks that won't fade for a long time if taken care of properly. We recommend the following care steps to best extend the life of your tshirt:
• Machine-wash cold, inside-out on a gentle cycle with mild detergent and like colors. Use non-chlorine bleach only when necessary. Do not use fabric softeners or dry-clean the items.
• Tumble-dry on a low cycle, but hang-drying works best.
• Iron inside-out using a cool iron. Do not iron the print.
Follow these instructions carefully to avoid fading and cracking of the print, and shrinking the garment that can occur if you wash or dry it on a high setting. -
Yes, this is completely normal. The DTG digital printing process requires a fabric finish to ensure the water-based inks adhere to the fabric surface (otherwise they would flake off). We recommend washing before wearing following instructions above. It should only take one wash cycle to eliminate the odor.
