Image 1 of 8
Image 2 of 8
Image 3 of 8
Image 4 of 8
Image 5 of 8
Image 6 of 8
Image 7 of 8
Image 8 of 8
Age restrictions: For adults
EU Warranty: 2 years
Other compliance information: Meets the flammability, lead, cadmium, bisphenols and phthalates level requirements.
In compliance with the General Product Safety Regulation (GPSR), Oak inc. and SINDEN VENTURES LIMITED ensure that all consumer products offered are safe and meet EU standards. For any product safety related inquiries or concerns, please contact our EU representative at gpsr@sindenventures.com. You can also write to us at Markou Evgenikou 11, Mesa Geitonia, 4002, Limassol, Cyprus.
Care Instructions and FAQ
-
We have gotten feedback from some customers that these sweatshirts can run a little small. Our best advice is to measure a sweatshirt you have that fits well and then compare to the sizing charts. If your measurements fall within the outer 2” of the size range, we recommend sizing up.
-
Yes, this is completely normal. The DTG digital printing process requires a fabric finish to ensure the water-based inks adhere to the fabric surface (otherwise they would flake off). We recommend washing before wearing following instructions above. It should only take one wash cycle to eliminate the odor.
-
Our printer uses the latest direct-to-garment (DTG) printing technology with high-quality inks that won't fade for a long time if taken care of properly. We recommend the following care steps to best extend the life of your tshirt:
• Machine-wash cold, inside-out on a gentle cycle with mild detergent and like colors. Use non-chlorine bleach only when necessary. Do not use fabric softeners or dry-clean the items.
• Tumble-dry on a low cycle, but hang-drying works best.
• Iron inside-out using a cool iron. Do not iron the print.
Follow these instructions carefully to avoid fading and cracking of the print, and shrinking the garment that can occur if you wash or dry it on a high setting. -
We want you to be happy with your purchase. Each item is made to order and ships to you directly from the manufacturer. If your item arrives and is damaged, defective, misprinted, or differs from your order, please contact us immediately so we can help get you a replacement. Unfortunately, because each item is made especially for you, we are unable to offer exchanges or returns for any other reasons.
-
Don’t worry, we’re here to help! Please send a few photos to info@katespain.com showing the problem as clearly as possible. Use a measuring tape in the photo if that will help to convey the issue (ie: if the print is off-center). Include a brief description in your note and either Pete or I will get back to you quickly to resolve the issue to your satisfaction as much as possible. Your happiness and positive experience is so important to us!
